SpeedDream christened and tested

Please follow SpeedDream on Facebook

SpeedDream touches the water for the first time

It’s been a big week for the SpeedDream Team as we continue to test and refine the concept in advance of sailing the boat. Like a house where the walls and floors go up quick and it’s the interior detail that takes time, the final stages of building SpeedDream have been slow, but necessary, as we work through all the different details that have gone into this breakthrough design. Finally, after eight months of construction the bright red keel finally made contact with cold Maine water as SpeedDream27 was officially launched.

Tatiana Murnikov, wife of Lead Designer and project coordinator Vlad Murnikov did the honors with a traditional bottle of champagne. Instead of cracking it against the razor sharp wave piercing bow, it was decided to use the solid bulk of the lead bulb as a place to smash the bottle and with one swift crack SpeedDream27 was officially named and launched. The boat was lowered into the water and settled quickly onto its designed lines.

Tatiana Murnikov does the honors with a bottle of bubbly

Earlier in the week SpeedDream27 was fully rigged with all sails hoisted and all the lines, sheets and deck hardware put through their paces. There is an elegant simplicity to the entire layout that will allow the crew to manage the boat at high speeds and in a very wet and fast moving environment. The intricate keel canting mechanism was fully tested in a dry run without the keel attached, and it went off without a hitch. The mechanism is push button controlled from the helmsmans station and allows minor adjustments to the keel angle as well as a single button push for a complete side-to-side cant through a tack or gybe.

With the christening and dry sailing completed the next phase is a series of in-the-water tests that will place increasing loads on the keel mechanism and the rest of the boat. This critical area of the overall SpeedDream design is truly revolutionary and while in theory and in dry sailing it has performed as designed and engineered, there will be a need for refinement over the next couple of weeks.

With the leaves changing in Maine and crisp, cool Fall breezes blowing it’s tempting to cut the lines and leave the dock for a sail, but despite the temptation to do so these next few weeks are the most important to the success of the project so it’s slow and steady with careful step-by-step analysis before the maiden sail.

Heading for the christening

More images can be found on the SpeedDream website

Short video of SpeedDream heading for launching...